Table Of Contents
Top 5 best thermal pastes for cooling computer CPU in 2020 review
Is your pc overheating? You need a thermal paste .But you do not just pick the thermal grease you find on the rack. Therefore, you are generally looking for the best thermal compound available on the market.
Therefore, in this article, we will look at the best thermal grease that you can buy for various applications in 2020. We’ll also answer any requests you’ve made normally and even figure out how to apply thermal grease along with the best CPU thermal grease on your CPU.
#1. Arctic Silver Thermal Paste
Ice Silver 5 has a strong thermal conductivity of 8.9 W / Mk. It is superior to the GC Extreme, but not comparable to the Kyronaut. In any case, it is not conductive; therefore incredible for the use of learners. The nature of this thermal paste justifies itself with real evidence, since it neither drains, runs nor moves. This is even longer if you do not move your CPU frequently.
Ice Silver 5 contains no silicone. The suspension fluid is a restrictive mixture of innovative polysynthetic oils that interact in three distinct stages. Because of the syringe, the consistency of Arctic Silver 5 is designed to be easy to use.
#2. Nkomax Thermal Paste
With a perfect consistency, the MX-4 is anything but difficult to use, even on delicate feet. The potential outcomes for its application and the most appropriate approach to avoid spaces between CPU and cooler. The Arctic MX-4 compound consists of miniaturized carbon particles that provide very high thermal conductivity. The heat generated by the CPU or GPU is spread quickly and productively, even suitable for overclocking. It contains no metallic particles, so that the electrical conductivity is not a problem. Unlike silver and copper compounds, it guarantees that contact with electrical pins will not cause any damage.
#3. Cooler Master Thermal Paste
Cooler Master HTK-002 heat transfer compounds are oil-like silicone materials, which are heavily loaded with thermally conductive metal oxides. This mixture leads to a high thermal conductivity, a low drainage and a high temperature resistance. These compounds counteract changes in consistency at temperatures up to 177 ° C (350 ° F) and maintain a positive heat sink seal to enhance heat transfer from the electronic device to the heat sink or body in this manner, thereby improving overall efficiency the gadget is raised by
#4. StarTech thermal paste
The StarTech thermal paste provides ideal heat exchange between the CPU and the heat sink through a metal oxide compound. Our thermal grease for the CPU improves the viability of CPU coolers by keeping the CPU thermally attached to the heatsink. An excellent metallic arrangement that guarantees the most extreme distribution of heat generated by the CPU to improve performance and increase the stability of the frame. and is more practical than traditional silicone-based heat oil / CPU paste, providing ideal protection against CPU heat damage.
The metal-based compound contains a metal oxide of negligible electrical conductivity. This shows that it is still capacitive with metal mixtures. You should also be careful not to spill it on motherboards. For this reason, you should use a small amount when replacing old thermal oil.
This compound arrives in a resealable syringe device. It guarantees adequate capacity as you can close it after use and place it where it is needed. This thermal grease is confirmed for long-range stability. You can rely on thermal conductivity for the regular use of exhaustive applications.
#5. Noctua NT-H1 thermal compound
The most important thermal grease, which marks all boxes for the perfect thermal compound, is the Noctua NT-H1. This thermal grease has superior properties from the level. It is not electrically conductive, there is no break-in period. and there are long periods of stable execution.
First of all, your CPU / GPU is not threatened by a short circuit. You should not be an expert to see how this thermal grease is applied. Its consistency takes into account the most popular application for pea estimation where the heat sink does not form air bubbles.
You will love the heat differences in standard applications, especially when used in stressed PCs.
The Noctua NT-H1 has a thermal conductivity of 8.9 W / Mk. This is very similar to the Arctic Silver 5. It is said to be amazingly helpful and goes beyond just surpassing what the Arctic S5 offers. Its temperature range is between – 580-3020F. It is conceivable to also work with fluid cooling stands.
Conclusion
Whether you need to design your PC or look for a better heat sink design, this rundown has everything in sight. We trust you have all the data you need when choosing your next thermal compound.
These brands are geared to the needs of customers, from bad players to superior conditions. With these models, you can guarantee value, quality, and appropriateness.
Leave a Reply
You must be logged in to post a comment.